Stainless cable glands and PG threaded cable glands reviews? Our ATEX accessories meet the requirements of the European Directive 94/9/EC as required. Here, too, you can choose from a wide range of lock nuts, extensions and reductions as well as seals. In addition, we offer adapter elements and special clamping brackets for our ATEX Ex d/e cable glands to achieve an additional external strain relief.
Different cables demand different types of cable glands. For example, the requirements for an armoured cable are different to those of unarmoured cables. Armoured : Extra layer of protection to prevent damage. This may be a single wire armour, braided armour, pliable wire armour or double steel tape armour , Areas where exposed to threat of mechanical damage. Unarmoured: More basic than armoured. Can have no seal, or have a single outer seal or a double outer seal. Fixed installations not exposed to risk of mechanical damage.
Pg thread form of a German conduit pipe thread (DIN 40430) Unit: mm The screw thread referred to as a Pg 13.5 is a German DIN standard 40430 conduit pipe thread type. The thread angle is an 80 ° included angle and is similar to the JIS standard JIS C 8305 for thin steel conduit threads. Common applications for cable glands include aerospace, cleanroom, fire protection, industrial, marine, panel or enclosure, power or utility, railway, and telecommunications. Fire protection glands : Designed and rated for prevention of fire propagation across the bulkhead or barrier. See more info on PG Cable Gland.
CMP flameproof cable gland being suitable for armoured cables, provides mechanical cable retention and electrical continuity via armour wire termination. A detachable armour cone and CMP AnyWay universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc, and re-connected with the same consummate ease.
What is a Barrier Gland? Barrier glands are similar to normal glands, except a compound sealant material is used to ensure the inside of the cable is gas tight as well as the outside. When Should a Barrier Gland be Used? BS EN60079-14 Electrical Apparatus for Explosive Gas Atmospheres Part 14 – Electrical Installations in Hazardous Areas (other than Mines) provides a selection process for deciding if a barrier gland is required. There are various options to consider, however if the hazardous gas require IIC apparatus, or if the volume of the enclosure is greater than 2 litres then it is likely you will need to use a barrier gland. IIC apparatus is generally associated with Hydrogen.
CableGlandsOnline.com offer a wide selection of cable glands and cable ties to fit your needs. All of our cable glands meet IP68 specifications as liquid tight and are resistant to low level acides and alkalis. These cable glands are also designed for install well. Here are you can find a full sizes of all kinds of cable glands. Whether your application requires metric, npt or pg or other applications. You will find what you need here. Source: https://cableglandsonline.com/.