Quality auto ignition coil factory in China? Haiyan car ignition coil manufacturers have professional production workshops and great production technology, our main product is the car ignition coil, automotive ignition coil and engine coil. The Haiyan car ignition coil with the national quality inspection standards, has reasonable structure, stable performance, good safety, and high reliability. Our automotive ignition coil is also available in a wide range of types and specifications. Haiyan ignition coil supplier will try our best to meet Customers’ needs. Discover even more info on ignition coil manufacturers. Ignition coil manufacturer has more than 30 years of production experience.
The primary winding of an ignition coil will typically contain 150 to 300 turns of wire; the secondary winding will typically contain 15,000 to 30,000 turns of wire, or around 100 times more than the primary winding. The magnetic field is initially created when the vehicle’s electrical system applies approximately 12 volts to the ignition coil’s primary winding. When a spark is required at a spark plug, the ignition system will switch off the current flow to the primary winding, which will cause the magnetic field to collapse. The collapsing magnetic field will induce a voltage into the primary winding in the region of 200 volts; but the voltage induced into the secondary winding will be approximately 100 times greater, around 20,000 volts.
What is the reason? Here are some of them: The power supply voltage is unstable; The resistance of the high-voltage line is abnormal, replace the high-voltage line; There is a short circuit phenomenon in the secondary; The primary current of the ignition controller is too high, causing the ignition coil to overheat; Problems with high temperature and high-pressure wave work well; It is very unlikely that the coil itself is a problem, you can try another brand; The integrated block of the igniter does not work well.
The first coil-based ignition system is credited to the American inventor Charles Kettering, who developed a coil ignition system for a major vehicle manufacturer around 1910/1911. For the first time, he devised an electrical system that powered the starter motor and ignition at the same time. The battery, a generator and a more complete vehicle electrical system provided a relatively stable electrical supply to the ignition coil. The Kettering system used a single ignition coil to produce a high voltage, which was passed to a rotor arm that effectively pointed the voltage to a series of electrical contacts located in the distributor assembly (one contact for each cylinder). These contacts were then connected by spark plug wires to the spark plugs in a sequence that made it possible to distribute the high voltage to the spark plugs in the correct cylinder firing order.
The products are produced by Haiyan hardware accessories manufacturer. It is highly resistant to temperature and heat. The manufactured hardware accessories have such merits of as to be used in the area. It is highly resistant to temperature and heat. Haiyan hardware accessories supplier has developed a broad market at home and abroad with its excellent quality, fast delivery, and timely and thoughtful service. It is highly resistant to temperature and heat. Read even more info at https://www.hj-auto.com/.